1xN rack-mounted optical switch is a kind of optical path control device which has the function of optical path control and switch. it can choose working optical path switch manually with button and also control optical path switch or scan in frequency the optical switch which need to be monitored with rs 232 port and ethernet port. GEZHI Photonics can supply full range of 1x2, 1x4, 1x8, 1x12, 1x16, 1x24, 1x32, 1x64, 1x128 up to 1x512 fiber optical switch rackmount.
Rackmount 1×N(16≤N≤64) Optical Switch
This 2RU 19' Rackmount with no preinstalled optical switch modules. It is designed for 1xN (16≤N≤64) opto-mechanical optical switch modules. Modules can be easily installed into the chassis. The dimension of this 1RU 19” rackmount chassis is 483X230X89mm or 483X350X89mm .
The front panel bulkheads can be fit with typical FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, ST/APC, ST/UPC, MPO connector types etc. Normally this 2RU 19” rackmount can install 1x24 , 1x32 , 1x48 , 1x64 or customized Optical Switches.
GEZHI Photonics provides comprehensive rackmounts, including 1RU rackmount, 2RU rackmount, 4RU rackmount, and Desktop rackmount, which can accept our 256-channel opto-mechanical optical switch modules. Our optical switch rackmounts are manufactured to the highest quality standards in state of art facilities. We also offer opto-mechanical optical switch modules to make a full set sollution.
Technical Index
Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX
Panel to Explain
Front Panel
1xN≤16 Optical Switch 19”1U Rack mount
1xN≤36 Optical Switch 19”2U Rack mount
Power: Master switch of power supply
RJ45:Communications network management interface ;
RS-232: Rs- serial interface ; RS232 serial communication interface;
LCD:Devices that display information directly;
▲: Key to move up; ▼: Key to move down; Enter: Key to determine;
Esc: Key to cancel;
com,1~16:Fiber interface;
Back Panel
AC:85~265V: Power cord interface;
ON/OFF: Master switch of power supply ;
Default Setting
address:01
RS-232:Baud rate:9600; Data bits:8 bit; Stop bit: 1 bit; Parity bit:NONE;
RJ45: IP:192.168.1.100 ; PORT:5000; TCP/IP:TCP Server and UDP
(Fixed port:18888)
Communication Protocol:
“_”:A underline;
Communication protocol all in uppercase characters;
The device executes an instruction each time;
"<" As the start instruction; ">" As an end instruction;