Quad 2×2 Bypass Optical Switches

Quad 2×2 Bypass Optical Switches

Description

The Quad 2×2 Bypass Fiber optic switch integrated 2 dual 2×2 bypass switches in a single compact format. It is designed for 40G/100G transceiver bypass application. The device connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patented opto-mechanical configuration and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The switch has integrated electrical position sensors. This novel design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost. The switch is bidirectional.

Features

Compact design, Miniature size

Short switching time

Bi-directionalLow optical distortions

Low cross talk, Low Insertion Loss

Wide operating wavelength Range

Applications

R&D in Laboratory

System monitoring

Metropolitan Area Network

Network protection and restoration

Instrumentation, testing, and measurement

Technical Paremeter

Parameters	Unit	Specifications
Operating Wavelength	nm	1260~1620(SM)、850(MM)
Insertion Loss	dB	≤1.1
Wavelength Dependent Loss	dB	≤0.30
Polarization Dependent Loss	dB	≤0.10
Temperature Dependent Loss	dB	≤0.25
Return Loss	dB	SM≥50 MM≥30
Cross Talk	dB	SM≥55 MM≥50
Switch Time	ms	≤8
Repeatability	dB	≤±0.02
Durability	times	≥107
Operating Voltage	V	5
Switch Type		Non-Latching/Latching
Operating Temperature	℃	－20~＋70
Storage Temperature	℃	－40~＋85
Optical Power	mW	≤500
Dimension	mm	28L×27W×8.0H

Pins

Type	Pin	Electric Drive		Status Sensor
Quad 2×2 Bypass		Pin 1	Pin 8	Pin 2-3	Pin 3-4	Pin 5-6	Pin 6-7
Latching	1→1’, 2→2’ 3→3’, 4→4’ 5→7’, 6→8’	—	V+	Close	Open	Open	Close
Latching	1→3’, 2→4’ 5→5’, 6→6’ 7→7’, 8→8’	V+	—	Open	Close	Close	Open
Non-latching	1→1’, 2→2’ 3→3’, 4→4’ 5→7’, 6→8’	—	—	Close	Open	Open	Close
Non-latching	1→3’, 2→4’ 5→5’, 6→6’ 7→7’, 8→8’	V+	GND	Open	Close	Close	Open

Optical Route

quad 2x2 bypass route.jpg

Demension:

quad 2x2 bypass route.jpg

Ordering Information

Type

Mode

Wavelength

Voltage Type

Control Model

Fiber Type

Fiber Diameter

Fiber Length

Connector

Quad2x2B

SM=SM

MM=MM

85=850nm

13/15=1310/1550nm

X=Others

3=3V

5=5V

L=Latching

N=Non- Latching

5=50/125

6=62.5/125

9=9/125

X=Others

25=250um

90=900um

20=2.0mm

30=3.0mm

X=Others

1=1m

2=1.5m

X=Others

0=None

1=FC/PC

2=FC/APC

3=SC/PC

4=SC/APC

5=ST/PC

6=ST/APC

7=LC/PC

8=LC/APC

X=Others

Quad 2×2 Bypass Optical Switches.pdf

- verification code

Quad 2×2 Bypass Optical Switches

verification code

verification code